FAQs

If your question isn’t answered below, please contact us, and we’ll answer it.

When you receive your BR product you can install it in your system right away and notice a change in your system response. However, you should allow about twenty-four hours at room temperature before you consider any critical assessment of the product in your system.

The relationship between the BR product and your system will gradually develop and improve further. This aspect is totally system dependant, but the system may continue to improve over time which could extend into weeks of operation.

The working load capability of a single BR Pad we now set at 15kg. A pad will take considerably more load than that but above that level we recommend that it is better to spread the total load of the equipment by adding one or two addition pads.

The simple answer is what works best in your system.

The modules are passive and are positioned off-line where they purge energy out of the system. Their role is different to active filters and conditioners that focus on changing the state of the system from an in-line position. The internal zones of the Power Modules are segregated and no current flows inside the module, hence different levels of voltage do not impact on operation or performance.

By engaging with ourselves and our specialist retailers. Ideally you should listen to our products in your own system.

We occasionally have ex demonstration, discontinued and B-Stock items. When available these can be found in our webshop Clearance section.

We sell our products on this website and via our Authorised Partner sales outlets.

Please see our Delivery page.